Refrigeration Condensing Units,Freezer Air Cooled Condenser,Air Cooler Evaporator

Common faults of cold storage refrigeration system (3) Apr 13, 2022
6. The oil temperature is too high cause of issue: The cooling effect of the oil cooler decreases; Insufficient oil cooling water supply; Abnormal wear and tear of the compressor of condensing unit; Method of exclusion: The oil cooler is dirty and needs to be cleaned; increase water supply; Check the compressor of condensing unit; 7. Oil pressure is too low cause of issue: The oil pressure gauge i...
- cooler evaporators
- condensing unit
- Cold room condensers
Common faults of cold storage refrigeration system (2) Apr 13, 2022
3. The suction pressure is too high cause of issue: Excessive opening of expansion valve; There is a problem with the expansion valve or the position of the temperature sensor is incorrect; The amount of refrigerant in the system is too large; Excessive heat load; The suction valve is broken, high and low pressure blow-by gas; The safety valve is opened prematurely, and the high and low pressure a...
- cooler evaporators
- Cold storage condensers
- condensing unit
Common faults of cold storage refrigeration system (1) Apr 12, 2022
1. Exhaust pressure is too high cause of issue: There are non-condensable gases such as air in the system; Insufficient or too hot cooling water; The Cold room condensers is dirty and affects heat exchange; Too much refrigerant in the system; The exhaust valve is not fully opened or the exhaust pipe is not smooth. Processing method: Release air and other non-condensable gases; Adjust the cooling w...
- Cold room condensers
- air cooler evaporators
- condensing units
The main performance of the normal operation of the refrigeration system Apr 12, 2022
1. After the compressor is started, it should run smoothly without noise, and the protection and control components should be able to work normally. 2. The cooling water and refrigerant water should be sufficient, the water pressure should not be less than 0.12MPa, the water flow should meet the design requirements, and the cooling water temperature should generally be around 32℃. 3. The outlet pr...
Key components of air-cooled heat pump unit Mar 18, 2022
1. Compressor The compressor is the "heart" of the refrigeration system, compressing the low-temperature and low-pressure refrigerant gas into a high-temperature and high-pressure refrigerant gas. Common compressors are: semi-hermetic piston compressor, scroll compressor, screw compressor, etc. 2. Air-cooled fin heat exchanger Condenser function: to cool the superheated vapor of the refrigerant di...
- cooler evaporators
- air cooled condenser
- Shell and tube heat exchanger
How an air-cooled heat pump works Mar 18, 2022
Air-cooled heat pump cold and hot water condensing unit is a unit that generates cold/heat in a centralized manner. It is in the form of a distributed air conditioning system for each room. The terminal device of the cold/hot water unit is usually a fan coil unit. Cold and hot water means that the unit can produce cold and hot water, which is the most common household water machine central air con...
Cold storage energy saving method Feb 22, 2022
With the continuous development of refrigeration technology and the rapid expansion of cold storage capacity, how to keep cold storage with high efficiency and low energy has become a bottleneck restricting the development of cold storage. Aiming at how to configure a suitable heat exchange system, how to improve the refrigeration efficiency of the heat exchange system, and how to reduce the cold ...
- cold room condensing unit
- air cooled condenser
- cold room air cooler
Reasons for abnormal high and low pressure of cold storage system Feb 22, 2022
The evaporating pressure and temperature and the condensing pressure and temperature of the refrigeration system are the main parameters. It is an important basis for operation and adjustment. According to the actual conditions and system changes, the operating parameters are continuously adjusted and controlled to operate under economical and reasonable parameters, which can ensure the safety of ...
- cold room condensing unit
- air cooled condenser
- cold room air cooler
Common faults and causes of screw chillers Jan 12, 2022
Common faults and causes of screw chillers 1. High voltage fault The compressor discharge pressure is too high, causing the high pressure protection relay to act. The compressor discharge pressure reflects the condensing pressure. If the pressure is too high for a long time, it will cause the compressor running current to be too large, which will easily burn the motor, and also easily cause damage...
- screw chillers
- evaporator
- water cooling unit

1 2 3 4 5 6

A total of 6 pages

Categories

Blog

New Blog

Tags